Ball Valves With Actuator

Carbon steel automatic ball valves are specifically designed for the refrigeration industry and comply with all current and necessary requirements, regulations and norms.
These valves are equipped with electric or neumatic actuators and are available in two versions Open-Closed or proportional control 4-20 mA (JJ and Rotork brand).
The valves are also available with a safety closing device in case of power supply failure.

Technical Specifications:

  • Sizes
    • Full bore flow: DN10 – DN80
    • Reduced bore flow: DN25 – DN100
  • Pressure: PN25 (standard), PN40 and PN65 (needs to be consulted)
  • Temperature: -50ºC/+150ºC (standard)
  • Temperatures below –50ºC: Needs to be consulted
  • Power supply 24-230 Volt CC CA – according to actuator type
  • Refrigerants: Suitable for all standard refrigerants according to EN 378-1, including NH3 and CO2. The use of flammable and especially corrosive fluids needs to be priorly consulted.

These valves are also available in stainless steel (DN10-DN80).

See Technical Datasheet